Brands: Luxaire, Mitsubishi, Carrier, Nest, Burnham, AO Smith
The annual cost of heating and cooling the average U.S. home is approximately $2,000. Based on recent years, that cost will continue to rise. With an energy-efficient Luxaire® air conditioning or heating system, you don’t have to be part of that statistic. If makes financial sense to calculate how much energy a new Luxaire® home comfort system can save you. The higher the efficiency of your system, the more you’ll save on utility costs. There are standard efficiency ratings that make it easy to compare the performance of different systems. To help you make informed decisions about energy savings, these ratings are explained below.
The Seasonal Energy Efficiency Ratio (SEER) rating measures the efficiency of central air conditioners or heat pumps over a theoretical cooling season. It's a simple ratio of the amount of cooling provided by the air conditioner (as measured in BTUs) with the amount of energy the central system consumes — measured in watts/hr. For example, if a system is rated at 16 SEER that actually means it produces 16 BTUs of cooling per watt-hour. But remember, a SEER number is theoretical. Your usage patterns, as well as proper equipment sizing and installation, will determine actual efficiency.
The Heating Seasonal Performance Factor (HSPF) measures a heat pump’s energy efficiency over one heating season combined with its SEER value over one cooling season. The HSPF formula is slightly more complicated. However, the HSPF rating uses BTU to calculate useful heating output (including electric heat) divided by the total electricity energy the heat pump consumed (in watt/hr.) during the heating season.
The Annual Fuel Utilization Efficiency (AFUE) measures average efficiency for furnaces, boilers and water heaters. This is a measure for a theoretical heating season - not including electricity. For SEER, HSPF and AFUE, higher numbers indicate higher energy efficiency. These numbers are then used in two energy rating programs: The ENERGYGUIDE label and the ENERGY STAR® certification.
EnergyGuide Label: Manufacturers of heating and cooling equipment are required to display the EnergyGuide label. This label estimates how much energy the equipment uses, compares energy use of similar products, and gives approximate annual operating costs. Your exact costs will depend on usage, local utility rates and the type and source of your energy.
ENERGY STAR® certification: ENERGY STAR® is a voluntary energy awareness program developed by the U.S. Department of Energy and the Environmental Protection Agency (EPA). Our high-efficiency systems are labeled ENERGY STAR® to identify products that are at least 15% more efficient than standard products.
Get the Right Size Equipment For Optimal Comfort and Energy Savings
In most homes, the heating and cooling system is larger than required. Besides wasting energy, improper size can create uneven temperatures, poor humidity control and maintenance problems over time. Improper installation can reduce system efficiency by up to 30%. Properly sized ENERGY STAR® qualified equipment can easily cut your annual energy bill by hundreds of dollars. Programmable thermostats, like the Luxaire® Acclimate™ Residential Communicating Control with Wi-Fi® can save you even more with improved energy savings, home comfort and peace of mind that your equipment is operating at peak efficiency? Ask your local Luxaire® Dealer about high-efficiency residential products with the ENERGY STAR® label
Luxaire® is continually setting the standard in features and innovation and is proud to have its products recognized for continued advancements in quality, performance, efficiency and reliability.
Best Buy Award
For 50 years, people have trusted Consumers Digest magazine to identify outstanding values in a complex marketplace. That's why we're proud that a Consumers Digest Award was awarded to the Luxaire® Acclimate™ LP9C 33-inch Modulating Gas Furnace. It's the kind of recognition that shows that our high quality means high value for you.